Page 3 of 4
Re: Mutec MC-3+ Smart Clock
Posted:
Thu Jan 15, 2015 10:05 pmby the boss
You have to use apogee clock cards in both your d8b's to get it right. The stock card can't recive any worldclock .
Re: Mutec MC-3+ Smart Clock
Posted:
Fri Jan 16, 2015 9:06 amby Carlo
Hi BOSS,
Thanks for your help. In fact both my d8b's are equipped with the APOGEE CLK cards and the method you mentioned earlier on works great for me. Money saved as well since now i dont need a clock generator thanks to you
Best regards mate
Carlo
Re: Mutec MC-3+ Smart Clock
Posted:
Fri Jan 16, 2015 1:16 pmby the boss
Rock n roll
Re: Mutec MC-3+ Smart Clock
Posted:
Wed Jul 08, 2015 7:53 amby Carlo
the boss wrote:Hi
You don't need this device to connect this things together.
I have 2 d8b's with 4 x motu 2408 mk3 and a motu mtp.
You need two apogee sync card.
1 set your daw as master.
2 connect your first d8b sync in on apogee card to sync out on your motu card.
3 set first d8b to word clock in.
4 connect first d8b word clock out to apogee world clock in on d8b 2.
5 set d8b 2 to worldclock in.
Set your d8b's to sync sample rates in options.
REMEMBER to always boot up your d8b's first.
After fully boot start the motu interface.
Good luck
Hey Boss,
IT works! but i have an issue. On my second d8b i have an OPT8 - DIO8 - DIO8 cards configuration. On the first bank the sync seems ok but on the 2nd and 3rd bank i get a popping sound and an infrequent peak signal on the meter bridge. Is it possible that the DIO8 is not getting enough sync? Shall i swap them with other OPT8 cards? My first d8b has 3x OPT8 cards. I was going to change 2 of them with the 2nd d8b DIO8's. What do you think pls?
Carlo
Re: Mutec MC-3+ Smart Clock
Posted:
Wed Jul 08, 2015 10:42 pmby the boss
Hi
Check your opto cables.... This is not a stabil connection type. Just re connect or try others.
Re: Mutec MC-3+ Smart Clock
Posted:
Wed Jul 08, 2015 10:47 pmby the boss
.... Do not use too long opto cables and do not bend. Remember it's opto... If you can use tdif format...
Re: Mutec MC-3+ Smart Clock
Posted:
Thu Jul 09, 2015 1:04 pmby Carlo
Thanks so much
Re: Mutec MC-3+ Smart Clock
Posted:
Thu Jul 09, 2015 8:19 pmby anyhorizon
the boss wrote:.... Do not use too long opto cables and do not bend. Remember it's opto... If you can use tdif format...
I find that a strange comment. The data travels at the speed of light. You'd be hard pressed to be worried about the length of the cable... and they are surprisingly flexible.
Peter
Re: Mutec MC-3+ Smart Clock
Posted:
Thu Jul 09, 2015 11:23 pmby hyaena
Hi Peter,
nice to read you posting.
Any chance to get another song like "Rainy Night Again" from you ?
There´s no such forum for the DM2000, that I´m on now and so I come back from time to time - became addicted, I think.
So, have a good time
Manfred.
Re: Mutec MC-3+ Smart Clock
Posted:
Fri Jul 10, 2015 5:10 amby garrett21allen
I have been hopping peter would do another song
he has a power house voice coming out of that little body
now peter I am not saying you are little. what I mean is
the last song you put out I ask you a few things about how you
you did the reverb. you worlds to me was that's just little old me singing
I would love to hear another song from you. but I fill like you got a lot going on
maybe one day you will do another one for us old timers
Joe Allen