Change font size   Print view

MFX Software Loads, but effects do not work

Discussion board for Mackie's d8b Digital Console users.

Re: MFX Software Loads, but effects do not work

Postby anyhorizon » Thu Apr 16, 2015 5:23 pm

I'm sorry you're having this grief but as a last ditch effort, I'd save whatever you have in terms of sessions etc. to some external media and re-install the OS. Worth a try. Don't forget the 16 bit patch for OS 3.

Peter
In the scheme of things, there isn't one... just chaos.
User avatar
anyhorizon
Premium Member
Premium Member
 
Posts: 1069
Joined: Fri Nov 21, 2008 9:36 pm
Location: Down under or up over, depending on where in space you are.

Re: MFX Software Loads, but effects do not work

Postby funk » Mon May 04, 2015 9:37 pm

i have the same problem, there is a thred on here somewhere about it,
effects will load up and will show an input on the bar meters in the effecct.
but no output from the effect,
so i sent the card to a friend who has a d8b and it was the same on his.
so in case you cant send it back there is a use for it...
it makes a great floor tile adhesive spreader, did my whole kitchen floor with it,
im so impressed i have kept it for future use :P
Never drive faster than your guardian angel can fly!
"Funk is what you dont play"........GREAT.....im off to the pub then,
User avatar
funk
Registered user
 
Posts: 270
Joined: Tue Oct 16, 2012 1:58 am

Re: MFX Software Loads, but effects do not work

Postby High C Double G » Thu May 07, 2015 2:12 am

This isn't going to help anyone but I have a couple bad MFX cards -- I don't know why they fail. I need to take some inventory of known good pieces and bring some of this stuff to market since my new home is "d8b not hooked up now" -- honestly I have gone so simple and I do not like it near as much as my old setup -

I do have some chipped tile in the kitchen but I am not ready to do that job yet... but I have the tools apparently! :lol:

Signed,
Missing my d8b
Make some noise!!!
User avatar
High C Double G
Premium Member
Premium Member
 
Posts: 325
Joined: Tue Nov 25, 2008 3:55 am

Re: MFX Software Loads, but effects do not work

Postby funk » Fri May 15, 2015 12:18 am

High C Double G wrote:This isn't going to help anyone but I have a couple bad MFX cards -- I don't know why they fail. d8b


its easy..... cus they are made by mackie ;)
Never drive faster than your guardian angel can fly!
"Funk is what you dont play"........GREAT.....im off to the pub then,
User avatar
funk
Registered user
 
Posts: 270
Joined: Tue Oct 16, 2012 1:58 am

Previous

Return to d8b Forum

Who is online

Users browsing this forum: Google [Bot] and 5 guests

cron