Page 3 of 3

Re: This guy and family are so nice

PostPosted: Wed Apr 06, 2016 1:15 pm
by garrett21allen
Thanks mike I check the bios last night and they are the same way you set them nothing change by my bios sheet I think if it was the battery the bios would keep getting off. I remember mike even when the bios was wrong at ur studio there was still some light on your board remember we looked at e solo light and there was the light that shows all the eq setting it has some light But my board only light is the solo light. After seeing and hearing what your d8b sounds like I miss my d8b even more know. Thanks for any suggestions. Joe allen

Re: This guy and family are so nice

PostPosted: Thu Apr 07, 2016 8:06 am
by munkustrap
Hi

I think that your EPROM is damaged or that your brain board has some defects talking withe the EPROM.
At least one broken Address line is enough to loose functionality.

Do you get any text on the console Screen (43 Error, or sopmething else) or is it only the res Solo rude led that lits up)

Re: This guy and family are so nice

PostPosted: Thu Apr 07, 2016 1:19 pm
by garrett21allen
I don't get error 43 or nothing on the console screen Just the rud solo light and it don't blink it just stays on red Thanks munk for all your help. Looks like aim going to have to get a brain board wish there was a way to check the brain board before paying high dollars for one then it not be the brain board does anyone have one I could at least try out then if it works I will pay for ur time and the board. Thanks munk Joe allen

Re: This guy and family are so nice

PostPosted: Fri Jun 03, 2016 4:34 am
by SteveT
Hi Joe!!!

SteveT

Re: This guy and family are so nice

PostPosted: Thu Jul 07, 2016 2:46 am
by Eddiehunter
I have never encountered such a group of kind, knowledgeable folks. With that said, I need another donation of help.
I have a D8B version 5
I have an Alesis HD24XR
They are connected by optical cables.
I have an outboard harmonizer receiving it's signal from the bus 1 output under channel 1
The returning signal from the HD24 track 1 is a dry vocal
The bus out is properly routed to the harmonizer
The harmonizer out delivers signal to input channel 5
I can hear the harmonized signal on this channel
For some reason, I can't get a signal to show up on the track 5 meter of the HD24 so as to record a wet track of the vocal
My number is 561 662 8128
Eddie
I appreciate any advice

Re: This guy and family are so nice

PostPosted: Thu Jul 07, 2016 4:23 am
by Old School
Hi,
Please forgive me for asking this question, but I feel as though I must start at the beginning. Did you assign track 5 to tape out 5?

Have a blessed day in Christ,
Mike W.