I implore you
Posted: Mon May 22, 2017 1:22 amUse the database for answers. There are over 15 years of explanations regarding d8b idiosyncracies articulated in there. Its purpose was just for that.
Peter
Peter
Page 1 of 1
Posted: Mon May 22, 2017 1:22 amRe: I implore you
Posted: Mon May 22, 2017 3:07 amIf everyone just went to the database then we wouldn't have such wonderful conversations...
Re: I implore you
Posted: Mon May 22, 2017 4:24 amI see.
Re: I implore you
Posted: Mon May 22, 2017 5:54 amI was looking for a full rebuild on the faders.. I have to pull one from the board and do a over haul on it.
Re: I implore you
Posted: Mon May 22, 2017 6:21 amThat's in the database as well but you need to be gentle.
Peter
Peter
Re: I implore you
Posted: Mon May 22, 2017 7:26 pmI pulled the board and cleaned what I could. But some isopropyl alcohol got spilled in one. It wiped out all lube. I need to do something.
Re: I implore you
Posted: Mon May 22, 2017 11:45 pmLube from where ? You could try sewing machine oil.
Peter
Peter
Re: I implore you
Posted: Tue May 23, 2017 12:01 amHey Phantom,
Never used it, but came across these products when searching for fader-lube. http://store.caig.com/s.nl/it.A/id.1750 ... tegory=293
Have a blessed day in Christ,
Mike W.
Never used it, but came across these products when searching for fader-lube. http://store.caig.com/s.nl/it.A/id.1750 ... tegory=293
Have a blessed day in Christ,
Mike W.
Re: I implore you
Posted: Tue May 23, 2017 12:24 amPeter that's just it. Maybe they put a tiny bit of lube on the bar inside the fader? Motor? Not sure. But omce that alcohol hit it. It now feels like sand paper and is stiff. I pull the board, cleaned it with air, and let it dry out. Checked the belt. Plastic parts, etc all look fine. So someplace has to have been lubed by the manufacturer to make them at one time smooth.