Change font size   Print view

D8B and RME Fireface

Discussion board for Mackie's d8b Digital Console users.

D8B and RME Fireface

Postby Originalfunster » Thu Mar 23, 2023 12:59 pm

Hi all,

New member of the forum, and new user of the D8B.

So..
I am the proud owner of a D8B V5.1, I am runnung Cubase 12 pro, and have both a Fireface UC and a Fireface 800.
I have a signal at the deskbridge on playback, and I have a signal on the deskbridge when I plug in a mic or instrument, but I am not geting a signal in cubase.
So are there any D8B, Cubase, RME users on here here that could point me in the right direction?
Thanks in advance guys..
Originalfunster
Registered user
 
Posts: 3
Joined: Thu Mar 23, 2023 12:36 pm

Re: D8B and RME Fireface

Postby csp » Thu Mar 23, 2023 2:31 pm

Can you advise what output cards the desk has installed ?

It would really assist if you could describe exactly how you have everything set up.

Not that I have had any experience with either of the Fireface units but on just reading a description and features of the 800 unit,I would think that if you have the OPT-8 optical cards installed in the desk, you should be able to connect these via Toslink cables to the optical (ADAT) inputs on the 800 unit and at least see some signal on the 800's meters.

David
User avatar
csp
Premium Member
Premium Member
 
Posts: 595
Joined: Mon Dec 15, 2008 4:00 am
Location: Gold Coast region, Queensland, Australia

Re: D8B and RME Fireface

Postby Originalfunster » Fri Mar 24, 2023 12:34 pm

Hi David,

Thanks for the prompt reply.
I have the following cards installed
3 x opt-8 cards.
1x digital I/O AES/EBU.
I have connected the fireface 800 to 2 of the opt-8 cards (I may be getting another FF800 in which case I will daisy chain them and use the 3rd opt-8 card.) If I can work out how to connect the fireface uc to the 800 I will go that route as I already have the UC.

I have a small amount of outboard gear connected via a patch bay. The Fireface 800 is connected to both the patch bay and the desk.
The patch bay comes into the desk 1-8
The fireface800 is connected from the balance line out's 1-8 to the line in 17-24 on the D8B.
if I plug in a Mic, I get Sigal at both the FF800 and the D8B, but I am getting nothing in Cubase.
Hope that sheds a little more light..
Regards
Gary
Originalfunster
Registered user
 
Posts: 3
Joined: Thu Mar 23, 2023 12:36 pm

Re: D8B and RME Fireface

Postby Originalfunster » Fri Mar 24, 2023 12:36 pm

Hi David..
Ok that is really weird, I just saw your location...
Where on the coast are you? I am at Robina!!
Originalfunster
Registered user
 
Posts: 3
Joined: Thu Mar 23, 2023 12:36 pm

Re: D8B and RME Fireface

Postby csp » Fri Mar 24, 2023 11:24 pm

Tallai, but spend much of my time in Mudgeeraba.

Also drive through Robina --- shopping, driving to more shops, having coffee and all the other t hings that I really should not be doing !!!!!!!
User avatar
csp
Premium Member
Premium Member
 
Posts: 595
Joined: Mon Dec 15, 2008 4:00 am
Location: Gold Coast region, Queensland, Australia


Return to d8b Forum

Who is online

Users browsing this forum: No registered users and 19 guests

cron