Change font size   Print view

d8b / D8Bridge Dual Boot - Old School Style

Discussion board for the D8Bridge users

d8b / D8Bridge Dual Boot - Old School Style

Postby bitSync » Thu Aug 23, 2012 4:33 am

In case you haven't tried it yet, this is possible -

Image

One cable goes to the d8b CPU and the D8Bridge cable goes to the DAW CPU serial interface. The common cable goes to the d8b Console Data Port. The switch box came off of eBay including a DB25 - DB25 cable, brand new NOS for $10, I think. Saves the hassle of climbing behind the board and wear and tear on the d8b Console Data Port. Plus it looks so retro...
Win7 Pro x64 SP1 / SONAR 2016 Platinum x64 Newburyport / 2x Mackie d8b 5.1 + (D8Bridge v1.1 x32 or ProBox) / 3.20 GHz Intel i7 950, 24 GB DDR3 RAM, 2TB SATA3 SSD / RME HDSP9652 PCI (ASIO) / RME ADI-8 QS / New Belgium 1554
User avatar
bitSync
Premium Member
Premium Member
 
Posts: 381
Joined: Sat Dec 13, 2008 4:01 pm
Location: Baltimore, MD, USA

Re: d8b / D8Bridge Dual Boot - Old School Style

Postby MOSHWITZ » Thu Aug 23, 2012 5:03 am

sUP? :)

SWEET :mrgreen:

MOSHON
DAVE
User avatar
MOSHWITZ
Premium Member
Premium Member
 
Posts: 66
Joined: Sat Nov 29, 2008 3:41 am
Location: AlabamaHell

Re: d8b / D8Bridge Dual Boot - Old School Style

Postby Marc Girard » Thu Aug 23, 2012 3:13 pm

Oh nice! It's working fine? What about the mixer updates? The faders are behaving correctly?
Marc Girard
Bluaudio.org
http://www.bluaudio.org/d8bridge
User avatar
Marc Girard
Moderator
Moderator
 
Posts: 278
Joined: Wed Oct 13, 2010 5:26 am

Re: d8b / D8Bridge Dual Boot - Old School Style

Postby bitSync » Fri Aug 24, 2012 2:46 am

Oh nice! It's working fine? What about the mixer updates? The faders are behaving correctly?


Marc,

This is an update to my previous reply since at that time I only had partial D8Bridge functionality. At present, the A/B switch box appears to be transparent to your custom serial interface. Fader moves, solos, pans, mutes, etc., as well as transport controls, position indicators and even level meters pass without issue. It's pretty cool.

I'm not sure I can set up persistent audio routes first booting as a d8b then switching over to D8Bridge; I'm not optimistic about that. I'll have to try a few more experiments to be sure.

[Edited to revise reply]
Win7 Pro x64 SP1 / SONAR 2016 Platinum x64 Newburyport / 2x Mackie d8b 5.1 + (D8Bridge v1.1 x32 or ProBox) / 3.20 GHz Intel i7 950, 24 GB DDR3 RAM, 2TB SATA3 SSD / RME HDSP9652 PCI (ASIO) / RME ADI-8 QS / New Belgium 1554
User avatar
bitSync
Premium Member
Premium Member
 
Posts: 381
Joined: Sat Dec 13, 2008 4:01 pm
Location: Baltimore, MD, USA

Re: d8b / D8Bridge Dual Boot - Old School Style

Postby BBell » Sun Oct 21, 2012 8:54 pm

bitSync wrote:
Oh nice! It's working fine? What about the mixer updates? The faders are behaving correctly?


Marc,

This is an update to my previous reply since at that time I only had partial D8Bridge functionality. At present, the A/B switch box appears to be transparent to your custom serial interface. Fader moves, solos, pans, mutes, etc., as well as transport controls, position indicators and even level meters pass without issue. It's pretty cool.

I'm not sure I can set up persistent audio routes first booting as a d8b then switching over to D8Bridge; I'm not optimistic about that. I'll have to try a few more experiments to be sure.

[Edited to revise reply]


Did you ever determine if you could hot swap between d8b and d8bridge? If so, what were the effects of doing so?
Did you lose audio when you switched to the d8bridge and reinstate it when returning to the d8b? I would also think you would need to refresh each time you swapped?
-Bruce
BBell
Registered user
 
Posts: 7
Joined: Sat Oct 20, 2012 4:24 pm

Re: d8b / D8Bridge Dual Boot - Old School Style

Postby bitSync » Wed Oct 24, 2012 4:49 pm

Hi Bruce,

I've only tried one experiment so far - booting the d8b as designed, then flipping the DB25 data switch and reinitializing the console with the D8Bridge software. Whatever d8b audio route(s) I had prior to booting D8Bridge (I don't have a record of that) went away upon re-initializing with D8Bridge. Not a big surprise there. I have been intending to do a more rigorous evaluation but I haven't had time and I've also recently gotten an audio summing capability (Audient Centro) that now handles all of my monitoring requirements when in the D8Bridge DAW mode, so I haven't been especially motivated to research the dual boot behavior further. In fact, I'm loving the whole D8Bridge/DAW setup so much I'm wondering how much longer I'll be interested in the d8b as a digital mixer. I'm not there yet, but I could see my possible eventual migration to in-the-box only happening.

I regard the dual boot data switch as serving two basic functions, (1) a hard cutover between either using the d8b as it was originally designed or using it as a control surface for the DAW (that is, not necessarily for blended d8b/D8Bridge 1.1 operations), and (2) a means to cut down on wear and tear on the DB25 data connector on the back of the console. Both of these things, in my mind, were well worth the $10 switch and DB25 cable. Cheers.
Win7 Pro x64 SP1 / SONAR 2016 Platinum x64 Newburyport / 2x Mackie d8b 5.1 + (D8Bridge v1.1 x32 or ProBox) / 3.20 GHz Intel i7 950, 24 GB DDR3 RAM, 2TB SATA3 SSD / RME HDSP9652 PCI (ASIO) / RME ADI-8 QS / New Belgium 1554
User avatar
bitSync
Premium Member
Premium Member
 
Posts: 381
Joined: Sat Dec 13, 2008 4:01 pm
Location: Baltimore, MD, USA


Return to D8Bridge Forum

Who is online

Users browsing this forum: No registered users and 20 guests

cron