Change font size   Print view

Reaper, Pro Box and the d8b.

Discussion board for ProBox users

Reaper, Pro Box and the d8b.

Postby Recording Drummer » Fri Sep 12, 2014 10:24 pm

Hi Ralph,

Real good work here. I am not sure if Reaper will work with your Pro Box and the d8b. Here is the manual from Klinke.

https://bitbucket.org/Klinkenstecker/cs ... manual.pdf

Would it be possible to look this over and see if you are compatible? Klinke made the MCU fully compatible with Reaper to my understanding.

There is more info for Klinke on the Reaper Forum.

Thank you,

RD
Recording Drummer
Registered user
 
Posts: 45
Joined: Sun Aug 04, 2013 6:14 pm

Re: Reaper, Pro Box and the d8b.

Postby munkustrap » Sat Sep 13, 2014 10:38 am

Hi

I rushed throu the manual and I have good and bad news for you.

The good, yes it should work (Probox is on the connection site an MCU with two XTs)
The bad one: It seems so that you will have only the MCU (8 channels) not all 24
because this tool you need supports only the MCU not the MCE

It is possible that I make a version that emulates 3 MCU instead of 1MCU and 2XTs but I don't know if this works
with the emulator you posted ?

best regards
Ralph
munkustrap
Moderator
Moderator
 
Posts: 464
Joined: Fri Apr 04, 2014 8:10 am
Location: EU

Re: Reaper, Pro Box and the d8b.

Postby Recording Drummer » Tue Sep 16, 2014 4:47 am

Thanks Ralph,

I'm going to contact Klinke, maybe there is an update. I will let you know. Thanks for your hard work:)

RD
Recording Drummer
Registered user
 
Posts: 45
Joined: Sun Aug 04, 2013 6:14 pm

Re: Reaper, Pro Box and the d8b.

Postby munkustrap » Tue Sep 16, 2014 8:17 am

thanks
munkustrap
Moderator
Moderator
 
Posts: 464
Joined: Fri Apr 04, 2014 8:10 am
Location: EU

Re: Reaper, Pro Box and the d8b.

Postby winburn1 » Tue Sep 16, 2014 5:16 pm

Hello I to run reaper and would like further implementation of the pro box with reaper. I currently run the d8b bridge from Marc but I'm ready for my system to run better. I have the 43 or 34 system error will the pro box work with the error? Thanks for any information you can share.
winburn1
Registered user
 
Posts: 6
Joined: Sun Mar 31, 2013 9:05 am

Re: Reaper, Pro Box and the d8b.

Postby munkustrap » Tue Sep 16, 2014 11:03 pm

winburn1 wrote:Hello I to run reaper and would like further implementation of the pro box with reaper. I currently run the d8b bridge from Marc but I'm ready for my system to run better. I have the 43 or 34 system error will the pro box work with the error? Thanks for any information you can share.


Hi

You run d8bridge with reaper in 24 channel?
I guess that works because the d8bridge is a 3x MCU
And Not a MCU + 2XT.

Do you have these errors 34 or 43 also with the d8bridge?
munkustrap
Moderator
Moderator
 
Posts: 464
Joined: Fri Apr 04, 2014 8:10 am
Location: EU

Re: Reaper, Pro Box and the d8b.

Postby munkustrap » Wed Sep 17, 2014 3:00 pm

Just send the box to a reaper 4 user. I will keep you updated about Probox and reaper !
munkustrap
Moderator
Moderator
 
Posts: 464
Joined: Fri Apr 04, 2014 8:10 am
Location: EU

Re: Reaper, Pro Box and the d8b.

Postby Recording Drummer » Thu Sep 18, 2014 4:48 pm

Thank you Ralph,

Since I asked for help on the Reaper forum, I am starting to get some response. Waiting for Klinke to respond.

You can follow the original thread from the beginning if you have the time.

http://forum.cockos.com/showthread.php? ... ght=Klinke

RD
Recording Drummer
Registered user
 
Posts: 45
Joined: Sun Aug 04, 2013 6:14 pm

Re: Reaper, Pro Box and the d8b.

Postby bitSync » Thu Sep 18, 2014 9:02 pm

munkustrap wrote:You run d8bridge with reaper in 24 channel?
I guess that works because the d8bridge is a 3x MCU
And Not a MCU + 2XT.


I run Sonar X3e with D8Bridge v1.1 and have the MCU controller setup inside Sonar as 1 MCU and 2 XTs, but I remember seeing the D8Bridge MCU startup MIDI exchange (using MIDI-OX sniffer) Sonar asserting 1 MCU and 2 XTs consistent with its configuration (different Model IDs in the 3 SysEx messages (F0 00 00 66) - 10, 11 and 11) but D8Bridge ignoring that assertion from Sonar and always coming back with 3 MCU SysEx replies (10, 10, 10), one of the dozens of troubleshooting bug reports I provided to BluAudio. I never got a straight answer about whether D8Bridge was supposed to be setup as 3 MCUs or 1 MCU and 2 XTs; there are conflicts in the documentation. But it looks like D8Bridge is invariably declaring 3 MCUs based on the SysEx Model ID field.
Win7 Pro x64 SP1 / SONAR 2016 Platinum x64 Newburyport / 2x Mackie d8b 5.1 + (D8Bridge v1.1 x32 or ProBox) / 3.20 GHz Intel i7 950, 24 GB DDR3 RAM, 2TB SATA3 SSD / RME HDSP9652 PCI (ASIO) / RME ADI-8 QS / New Belgium 1554
User avatar
bitSync
Premium Member
Premium Member
 
Posts: 381
Joined: Sat Dec 13, 2008 4:01 pm
Location: Baltimore, MD, USA

Re: Reaper, Pro Box and the d8b.

Postby winburn1 » Thu Sep 18, 2014 11:59 pm

Yes I run Reaper and d8b bridge and it's bankable 40 plus tracks! Although I must admit that it is confusing with track counts that high! The error 34 or 43 (can't remember which one it is) is some type of system error which will not let the board boot up! But The bridge bypasses all that and allows one to use it as a controller! Is that possible with pro box.
winburn1
Registered user
 
Posts: 6
Joined: Sun Mar 31, 2013 9:05 am

Next

Return to ProBox

Who is online

Users browsing this forum: No registered users and 1 guest