Change font size   Print view

Apogee DIO.8 CArds

Discussion board for the HDR/MDR/SDR hard disk recorders users.

Apogee DIO.8 CArds

Postby mnewman49 » Mon Jun 01, 2015 11:06 pm

I have a Sony DMX -R100 console and a Mackie HDR 24/96 Digital Recorder. All of the music was recorded with adat format in my former D8B mixer. I couldn't locate but 1 Adat card for the Sony DMX. So I have 1 adat card in slot 1 an aes/ebu and in slot 2 and 2 TDIF cards slots 3&4. The only card that works is the Adat card in slot 1. *The HDR has 3 Apogee DIO.8 with V2.1 chips. There is no input or output on any of the tdif CARDS. Can someone please tell me how get input and output?
Any help would be greatly appreciated.

Thanks,
Mike Newman
mnewman49@gmail.com
409-951-9095
mnewman49
Registered user
 
Posts: 4
Joined: Thu Jan 26, 2012 12:10 am

Re: Apogee DIO.8 CArds

Postby Bruce Graham » Tue Jun 02, 2015 4:05 am

Hey Mike;

You can not mix card that way. The cards in you mixer must match the cards in you HDR.

As an example;
Sony Slot 1, ADAT, HDR Slot 1 ADAT
Sony Slot 2, AES/EBU, HDR Slot 2 AES/EBU
Sony Slot 3, TDIF, HDR Slot 3 TDIF.

Now having said that, where the Sync Reference comes from should only matter to the ADAT & TDIF cards. If you have the d8b as the master the HDR as the slave you SHOULD be OK.

Not sure what else to suggest.

Perhaps others will weigh in here and offer their insight.

Post back

Cheers
Bruce
Bruce Graham
Premium Member
Premium Member
 
Posts: 717
Joined: Tue Mar 15, 2011 12:02 am
Location: Walkerton, Ontario, Canada


Return to HDR/MDR/SDR recorders

Who is online

Users browsing this forum: No registered users and 7 guests