Change font size   Print view

Mackie d8b and RME HDSP 9652

Discussion board for Mackie's d8b Digital Console users.

Mackie d8b and RME HDSP 9652

Postby bryanhand » Mon Sep 25, 2017 8:57 pm

Hey folks,

So basically I've just dusted off an old d8b that I had lying around, and intend to use it. But I'm seeing all this talk of a ProBox card, and was wondering if I can just wire up my d8b through optical cables to my RME HDSP 9652?

I've got that and its expansion board, so I've got 3 in 3 out for all 24 faders, but I'm not sure what purpose the ProBox is serving beyond that.

I'm currently waiting on a PCI-PCIe conversion card, hence why I don't just plug it in and find out if it works.

Any help is appreciated!
bryanhand
Registered user
 
Posts: 2
Joined: Mon Sep 25, 2017 8:54 pm

Re: Mackie d8b and RME HDSP 9652

Postby Old School » Thu Sep 28, 2017 4:27 pm

Hi Brian,
Welcome to the forum. Please let us know how your set up works out.

Have a blessed day in Christ,
Mike W.
Wanna make God laugh, ...Tell Him your plans
User avatar
Old School
Premium Member
Premium Member
 
Posts: 400
Joined: Thu Jun 16, 2011 8:42 pm
Location: Elm City NC

Re: Mackie d8b and RME HDSP 9652

Postby FrankH » Fri Sep 29, 2017 6:00 am

I used to have a 9652 hooked up to my D8B. 24 channels of optical back and forth between the console and my old PCI only Mac. When I bought a new PCIe equipped Mac, there was no solution for the RME at the time, so I sold it and went with The MOTU 2408.

The RME worked great and I was loath to part with it. It had a pair of MIDI I/Os that ran the MTC and MMC between the machine flawlessly.

So, for what the 9652 was designed for....primarily audio in and out via optical, it worked perfectly with a D8B. From what I gather, the Probox turns the D8B into a giant DAW controller. Audio I/O is basically rendered useless. However, depending on the DAW you use, a good amount of 2 way MIDI fader, mute, solo and cc control is possible between the D8B and the DAW. That's pretty much all I can add to this subject.
User avatar
FrankH
Premium Member
Premium Member
 
Posts: 372
Joined: Wed Nov 26, 2008 7:21 pm

Re: Mackie d8b and RME HDSP 9652

Postby bryanhand » Fri Sep 29, 2017 7:56 pm

Hey folks,

At the moment I've got a Mackie MCU Pro and a Presonus AudioBox, was hoping to use the D8B as a combination of the two, allowing for more inputs and such.

But will it only replace the audiobox, unless I purchase a ProBox?

Cheers!
bryanhand
Registered user
 
Posts: 2
Joined: Mon Sep 25, 2017 8:54 pm

Re: Mackie d8b and RME HDSP 9652

Postby Old School » Mon Oct 02, 2017 2:51 am

Hey Frank,
So if I bought an RME 9652, then I could do away with my HDR if I had a good recording program on my PC? If so, what program would you Recommend. My HDR (and it's spare) grows more unreliable every day.

Have a blessed day in Christ,
Mike W.
Wanna make God laugh, ...Tell Him your plans
User avatar
Old School
Premium Member
Premium Member
 
Posts: 400
Joined: Thu Jun 16, 2011 8:42 pm
Location: Elm City NC

Re: Mackie d8b and RME HDSP 9652

Postby Carlo » Mon Oct 02, 2017 11:14 am

Hey OLD SCHOOL
I use Cubase 9. It works wonders. You can connect the RME with Cubase.

Carlo
If I have seen further it is only by standing on the shoulders of giants........
User avatar
Carlo
Premium Member
Premium Member
 
Posts: 431
Joined: Sat Jan 15, 2011 11:40 pm
Location: EU

Re: Mackie d8b and RME HDSP 9652

Postby FrankH » Tue Oct 03, 2017 1:30 am

What he said.
User avatar
FrankH
Premium Member
Premium Member
 
Posts: 372
Joined: Wed Nov 26, 2008 7:21 pm

Re: Mackie d8b and RME HDSP 9652

Postby Old School » Tue Oct 03, 2017 3:00 am

Thanks Guys, I will check it out!

Have a blessed day in Christ,
Mike W.
Wanna make God laugh, ...Tell Him your plans
User avatar
Old School
Premium Member
Premium Member
 
Posts: 400
Joined: Thu Jun 16, 2011 8:42 pm
Location: Elm City NC

Re: Mackie d8b and RME HDSP 9652

Postby Old School » Thu Oct 05, 2017 6:47 pm

Hey Guys,
I checked out Cubase and while I was at it I looked at pro-tools, but both of them seem too cumbersome for what I want. All I want is to be able to record, playback and move tracks around and crossfade. I don't want an "in the box mixer or effects because using my mouse for all that stuff just slows me way down. (I especially hate using a mouse to move faders). Don't get me wrong, I think these programs are very good, but they are not for me. Does anyone know of a simpler program for computer recording?

Thanks and have a blessed day in Christ,
Mike W.
Wanna make God laugh, ...Tell Him your plans
User avatar
Old School
Premium Member
Premium Member
 
Posts: 400
Joined: Thu Jun 16, 2011 8:42 pm
Location: Elm City NC

Re: Mackie d8b and RME HDSP 9652

Postby Carlo » Fri Oct 06, 2017 11:53 am

I dont use faders on cubase i just leave everything at unity then i use the d8b faders. I use the mouse to add plugins on the channel of cubase. Editing is another tool that works wonders on cubase. Protools is cumbersome
If I have seen further it is only by standing on the shoulders of giants........
User avatar
Carlo
Premium Member
Premium Member
 
Posts: 431
Joined: Sat Jan 15, 2011 11:40 pm
Location: EU


Return to d8b Forum

Who is online

Users browsing this forum: No registered users and 6 guests

cron