Change font size   Print view

Strange sound

Discussion board for Mackie's d8b Digital Console users.

Re: Strange sound

Postby Crash » Tue Oct 31, 2017 6:33 pm

The only ways I can think of to clock to an outside system is with BNC connection on the Apogee clock card or through light pipe via ADAT optical. I pulled this from a manual somewhere in regards to the BNC connectors on the DIO8 cards.

In addition, it has a BNC connector, which provides a DTRS clock output for devices
that require it. The DTRS clock is the same frequency as the word clock, but is 90 degrees out of
phase with the standard word clock.


If you can get the Red rig to sync to that... ?
User avatar
Crash
Premium Member
Premium Member
 
Posts: 1281
Joined: Fri Nov 21, 2008 10:05 pm

Re: Strange sound

Postby verner » Wed Nov 01, 2017 9:08 pm

Hi
It is very strange , but it has worked with this upset since
i got it.
verner
Registered user
 
Posts: 8
Joined: Tue Oct 17, 2017 10:50 am

Re: Strange sound

Postby Crash » Wed Nov 01, 2017 10:26 pm

verner wrote:Hi
It is very strange , but it has worked with this upset since
i got it.


My guess is that the issue is on the RED side. There are more variables on clocking than there are on the d8b.
User avatar
Crash
Premium Member
Premium Member
 
Posts: 1281
Joined: Fri Nov 21, 2008 10:05 pm

Re: Strange sound

Postby verner » Thu Nov 02, 2017 9:44 am

Synk upset in red24 “TDIF A”
Attachments
F5056416-3FD1-40A8-B339-0997AD81E083.jpeg
F5056416-3FD1-40A8-B339-0997AD81E083.jpeg (Array MiB) Viewed 690 times
verner
Registered user
 
Posts: 8
Joined: Tue Oct 17, 2017 10:50 am

Re: Strange sound

Postby Crash » Thu Nov 02, 2017 1:32 pm

I looked through the pics, I am not familiar enough with the RED setup to be of much help. Your life would be easier if you had an Apogee clock card installed on the d8b but I know they are hard to find these days.
User avatar
Crash
Premium Member
Premium Member
 
Posts: 1281
Joined: Fri Nov 21, 2008 10:05 pm

Previous

Return to d8b Forum

Who is online

Users browsing this forum: No registered users and 6 guests

cron