Mackie D8B

[Stamma2]

When i turn on my Mackie d8b all lights on the board start flashing and a loud popping noise coming from the speakers, pop pop pop pop pop ! ! ! !. When i loosen the CPU cable slightly and screw it back in the popping stop. Help

[lyn69]

Unscrew the BFC and spray the contacts with servisol and replace BFC tightly. Make sure there is no strain on the cable and it should be fine. I get this problem from time to time if I move the desk.

[captainamerica]

there are TONS of articles around this issue on this site itself..suggest you also look at FAQ on Ribbon Cable Connection Correction Procedure http://www.sonido-7.com/d8b/maintenance.html